PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35355-192
MS35355-192 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: SQUARE, head_height: 0.476 INCHES MINIMUM IN, thread_class: 2A A, thread_length: 1.500 INCHES MAXIMUM IN, fastener_length: 1.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-550-3713, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35355-192
NSN: 5306-00-550-3713
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleSQUARE
head_height0.476 INCHES MINIMUM IN
thread_class2A A
thread_length1.500 INCHES MAXIMUM IN
fastener_length1.500 INCHES NOMINAL IN
hardness_rating95.0 ROCKWELL B MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedUNFINISHED HEAD
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats1.088 INCHES MINIMUM IN
nominal_thread_diameter0.750 INCHES IN
NSN5306-00-550-3713
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35355-192 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: SQUARE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
THREAD LENGTH: 1.500 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
MINIMUM TENSILE STRENGTH: 55 POUNDS PER SQUARE INCH LBS
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLESQUARE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD LENGTH1.500 INCHES MAXIMUM IN
THREAD CLASS2A A
NOMINAL THREAD DIAMETER0.750 INCHES IN
MINIMUM TENSILE STRENGTH55 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH1.500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
FEATURES PROVIDEDUNFINISHED HEAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
24-026Upgraded Successor
successor cross-reference
successor
3-4 10X1 1-2INInterchangeable
Same NIIN cross-reference
interchangeable
00-345A409-1 1-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35355-192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35355-192?
MS35355-192 is a BOLT,MACHINE.
What parts can replace MS35355-192?
There are 3 known substitutes for MS35355-192: 24-026, 3-4 10X1 1-2IN, 00-345A409-1 1-2. Substitute compatibility should be verified for your specific system.
Is MS35355-192 still available?
MS35355-192 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35355-192

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026