PartsTable
Technical Data Sheet
PartsTable / MRO / 24-026
24-026 ✓ Verified by PartsTable
Bestway · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

TRANSDUCER,COMPUTED TOMOGRAPHY S. Key specifications include phase: THREE, material: STEEL OVERALL, body_style: SIGNAL BLOCK, duty_cycle: CONTINUOUS, head_style: SQUARE, grip_length: 20.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-011-1195, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 24-026
NSN: 5306-00-011-1195
FSC: 5306
CAGE: 88008 — TENNESSEE VALLEY AUTHORITY (USA)
SPECIFICATIONS
phaseTHREE
materialSTEEL OVERALL
body_styleSIGNAL BLOCK
duty_cycleCONTINUOUS
head_styleSQUARE
grip_length20.000 INCHES NOMINAL IN
head_height0.476 INCHES MINIMUM AND 0.524 INCHES MAXIMUM IN
ambient_temp50.0 CELSIUS DEGC
control_typeLOCAL OR REMOTE
thread_class2A A
overall_width8.875 INCHES NOMINAL IN
thread_length1.750 INCHES MINIMUM IN
NSN5306-00-011-1195
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 24-026 · Bestway ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A1 TYPE
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
DEPARTURE FROM CITED DESIGNATOR: AS MOD BY THD CLASS
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 13
•
FASTENER LENGTH: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAA1 TYPE
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
DEPARTURE FROM CITED DESIGNATORAS MOD BY THD CLASS
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH13
FASTENER LENGTH2.500 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.750 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.500 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
102484Upgraded Successor
successor cross-reference
successor
FFB575Upgraded Successor
successor cross-reference
successor
MS35354-201Upgraded Successor
successor cross-reference
successor
102495Upgraded Successor
successor cross-reference
successor
109177Upgraded Successor
successor cross-reference
successor
131286Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24-026?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24-026?
24-026 is a TRANSDUCER,COMPUTED TOMOGRAPHY S manufactured by Bestway. It is classified as a MRO (MRO_GENERAL).
What parts can replace 24-026?
There are 20 known substitutes for 24-026: 102484, FFB575, MS35354-201 and 17 more. Substitute compatibility should be verified for your specific system.
Is 24-026 still available?
24-026 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24-026

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026