PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35355-141
MS35355-141 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: SQUARE, head_height: 0.308 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.500 INCHES MINIMUM IN, fastener_length: 8.820 INCHES MINIMUM AND 9.120 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-550-0721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35355-141
NSN: 5306-00-550-0721
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleSQUARE
head_height0.308 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
thread_class2A A
thread_length1.500 INCHES MINIMUM IN
fastener_length8.820 INCHES MINIMUM AND 9.120 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedUNFINISHED HEAD
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.725 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_diameter0.500 INCHES IN
NSN5306-00-550-0721
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35355-141 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
FEATURES PROVIDED: UNFINISHED HEAD
•
THREAD QUANTITY PER INCH: 13
•
HEAD HEIGHT: 0.308 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD DIAMETER0.500 INCHES IN
FEATURES PROVIDEDUNFINISHED HEAD
THREAD QUANTITY PER INCH13
HEAD HEIGHT0.308 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
WIDTH BETWEEN FLATS0.725 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
FASTENER LENGTH8.820 INCHES MINIMUM AND 9.120 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FFB575Upgraded Successor
successor cross-reference
successor
C3-378Upgraded Successor
successor cross-reference
successor
24-026Upgraded Successor
successor cross-reference
successor
FFB575TYPE1GRADE1Interchangeable
interchangeable cross-reference
interchangeable
5-16 18X8INInterchangeable
interchangeable cross-reference
interchangeable
3-4 10X1INInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35355-141?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35355-141?
MS35355-141 is a BOLT,MACHINE.
What parts can replace MS35355-141?
There are 6 known substitutes for MS35355-141: FFB575, C3-378, 24-026 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35355-141?
MS35355-141 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-550-0721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35355-141

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026