PartsTable
Technical Data Sheet
Download PDF

MS35337-2 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS35337-2: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.202 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-8871, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35337-2
NSN: 5310-00-011-8871
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
hole_diameter0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.202 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
NSN5310-00-011-8871
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35337-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.202 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.202 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
118871Reference document
Same NSN cross-reference
Reference document — Secondary reference
BK901043Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFW84CLASSASTYLE1Reference document
Same NSN cross-reference
Reference document — Identification reference
901043Reference document
Same NSN cross-reference
Reference document — Secondary reference
265561PC61Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35337-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35337-2?
MS35337-2 is a WASHER,LOCK.
What parts can replace MS35337-2?
There are 5 known substitutes for MS35337-2: 118871, BK901043, FFW84CLASSASTYLE1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35337-2?
MS35337-2 is cataloged in the U.S. Government catalog under NSN 5310-00-011-8871. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35337-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.