PartsTable
Technical Data Sheet
Download PDF

901043 — FILTER,BAND PASS

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

901043: FILTER,BAND PASS.

The FILTER,BAND PASS is a the manufacturer industrial component. Key specifications include body_width: 0.380 INCHES NOMINAL IN, body_length: 1.000 INCHES NOMINAL IN, hole_diameter: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, inclosure_type: HERMETICALLY SEALED, overall_height: 0.500 INCHES NOMINAL IN, overall_length: 1.550 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-8871, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 901043
NSN: 5310-00-011-8871
NIINs: 000118871, 005680214, 011797388, 012454818
FSC: 5310 — Nuts and Washers
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
body_width0.380 INCHES NOMINAL IN
body_length1.000 INCHES NOMINAL IN
hole_diameter0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
inclosure_typeHERMETICALLY SEALED
overall_height0.500 INCHES NOMINAL IN
overall_length1.550 INCHES NOMINAL IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.202 INCHES NOMINAL IN
style_designatorRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
material_thickness0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
load_impedance_per_function50.0 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED
frequency_band_width_per_function50.00 MEGAHERTZ BLANK AND 60.00 MEGAHERTZ BLANK LOCATION NOT OTHERWISE SPECIFIED
NSN5310-00-011-8871
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 901043 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.202 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.202 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
118871Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35337-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BK901043Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFW84CLASSASTYLE1Reference document
Same NSN cross-reference
Reference document — Identification reference
265561PC61Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 901043?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 901043?
901043 is a FILTER,BAND PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 901043?
There are 5 known substitutes for 901043: 118871, MS35337-2, BK901043 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 901043?
901043 is cataloged in the U.S. Government catalog under NSN 5310-00-011-8871. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 901043

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.