PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35336-35
MS35336-35 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, hole_diameter: 0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.599 INCHES NOMINAL IN, style_designator: COUNTERSINK EXTERNAL TEETH, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-3135, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35336-35
NSN: 5310-00-058-3135
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
hole_diameter0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.599 INCHES NOMINAL IN
style_designatorCOUNTERSINK EXTERNAL TEETH
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
material_thickness0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35,TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-058-3135
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35336-35 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.599 INCHES NOMINAL IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 410 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.599 INCHES NOMINAL IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 410 OVERALL
STYLE DESIGNATORCOUNTERSINK EXTERNAL TEETH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35,TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
1234582Interchangeable
interchangeable cross-reference
interchangeable
114614Interchangeable
interchangeable cross-reference
interchangeable
7416548Interchangeable
interchangeable cross-reference
interchangeable
1518Interchangeable
interchangeable cross-reference
interchangeable
114617Interchangeable
interchangeable cross-reference
interchangeable
1829P536Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35336-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35336-35?
MS35336-35 is a WASHER,LOCK.
What parts can replace MS35336-35?
There are 26 known substitutes for MS35336-35: 1234582, 114614, 7416548 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35336-35?
MS35336-35 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-3135. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35336-35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026