PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1829P536
1829P536 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL, hole_diameter: 0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.599 INCHES NOMINAL IN, style_designator: COUNTERSINK EXTERNAL TEETH, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-4617, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1829P536
NSN: 5310-00-011-4617
FSC: 5310
CAGE: 78500 — MERITOR HEAVY VEHICLE SYSTEMS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
hole_diameter0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.599 INCHES NOMINAL IN
style_designatorCOUNTERSINK EXTERNAL TEETH
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
material_thickness0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
nondefinitive_spec/std_dataC TYPE
NSN5310-00-011-4617
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1829P536 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: COUNTERSINK EXTERNAL TEETH
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: -QQ-S-633 CANC FED SPEC 1ST MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 2ND MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 3RD MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 4TH MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 5TH MATERIAL RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: C TYPE
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCOUNTERSINK EXTERNAL TEETH
MATERIALSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION-QQ-S-633 CANC FED SPEC 1ST MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 2ND MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 3RD MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 4TH MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 5TH MATERIAL RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATAC TYPE
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
HOLE DIAMETER0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
OUTSIDE DIAMETER0.599 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
1234582Interchangeable
interchangeable cross-reference
interchangeable
114614Interchangeable
interchangeable cross-reference
interchangeable
7416548Interchangeable
interchangeable cross-reference
interchangeable
21633Interchangeable
interchangeable cross-reference
interchangeable
114618Interchangeable
interchangeable cross-reference
interchangeable
BEAX4GInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1829P536?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1829P536?
1829P536 is a WASHER,LOCK.
What parts can replace 1829P536?
There are 20 known substitutes for 1829P536: 1234582, 114614, 7416548 and 17 more. Substitute compatibility should be verified for your specific system.
Is 1829P536 still available?
1829P536 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1829P536

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026