PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35335-8

MS35335-8 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN, outside_diameter: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL TEETH, material_thickness: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5310-00-011-4607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35335-8
NSN: 5310-00-011-4607
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
hole_diameter0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
outside_diameter0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL TEETH
material_thickness0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
NSN5310-00-011-4607
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35335-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
HOLE DIAMETER: 0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL THICKNESS0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT EXTERNAL TEETH
HOLE DIAMETER0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
135629InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1229V515InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
11.00-22InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
X/GP3/TYBB/CLR/T/11.00-22/12PLYInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
11-22.00InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5000-6-6InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35335-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35335-8?
MS35335-8 is a WASHER,LOCK.
What parts can replace MS35335-8?
There are 16 known substitutes for MS35335-8: 135629, 1229V515, 11.00-22 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35335-8?
MS35335-8 is cataloged in the Federal Logistics Information System under NSN 5310-00-011-4607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35335-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026