PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1229V515
1229V515 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.513 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL TEETH, surface_treatment: CADMIUM OVERALL, material_thickness: 0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-4607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1229V515
NSN: 5310-00-011-4607
FSC: 5310
CAGE: 63734 — KAITLIN CORP (USA)
SPECIFICATIONS
hole_diameter0.513 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL TEETH
surface_treatmentCADMIUM OVERALL
material_thickness0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OR AISI NATIONAL SPEC ALL MATERIAL RESPONSES OR SAE NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-011-4607
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1229V515 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
HOLE DIAMETER: 0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT EXTERNAL TEETH
HOLE DIAMETER0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
135629Interchangeable
interchangeable cross-reference
interchangeable
1229V515Interchangeable
interchangeable cross-reference
interchangeable
11.00-22Interchangeable
interchangeable cross-reference
interchangeable
X/GP3/TYBB/CLR/T/11.00-22/12PLYInterchangeable
interchangeable cross-reference
interchangeable
11-22.00Interchangeable
interchangeable cross-reference
interchangeable
5000-6-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1229V515?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1229V515?
1229V515 is a WASHER,LOCK.
What parts can replace 1229V515?
There are 18 known substitutes for 1229V515: 135629, 1229V515, 11.00-22 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1229V515?
1229V515 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-4607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1229V515

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026