PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35333-33
MS35333-33 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 1.1192 INCHES MINIMUM AND 1.144 INCHES MAXIMUM IN, outside_diameter: 1.799 INCHES MINIMUM AND 1.830 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: CADMIUM OR ZINC AND CHROMATE OVERALL, material_thickness: 0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, nondefinitive_spec/std_data: A TYPE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-8578, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35333-33
NSN: 5310-00-013-8578
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
hole_diameter1.1192 INCHES MINIMUM AND 1.144 INCHES MAXIMUM IN
outside_diameter1.799 INCHES MINIMUM AND 1.830 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentCADMIUM OR ZINC AND CHROMATE OVERALL
material_thickness0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
nondefinitive_spec/std_dataA TYPE
NSN5310-00-013-8578
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35333-33 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
HOLE DIAMETER: 1.1192 INCHES MINIMUM AND 1.144 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC AND CHROMATE OVERALL
•
MATERIAL THICKNESS: 0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.799 INCHES MINIMUM AND 1.830 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAA TYPE
HOLE DIAMETER1.1192 INCHES MINIMUM AND 1.144 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC AND CHROMATE OVERALL
MATERIAL THICKNESS0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.799 INCHES MINIMUM AND 1.830 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
1224Interchangeable
interchangeable cross-reference
interchangeable
1229G423Interchangeable
interchangeable cross-reference
interchangeable
115551Interchangeable
interchangeable cross-reference
interchangeable
7E07Interchangeable
interchangeable cross-reference
interchangeable
180440Interchangeable
interchangeable cross-reference
interchangeable
180612Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35333-33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35333-33?
MS35333-33 is a WASHER,LOCK.
What parts can replace MS35333-33?
There are 27 known substitutes for MS35333-33: 1224, 1229G423, 115551 and 24 more. Substitute compatibility should be verified for your specific system.
Is MS35333-33 still available?
MS35333-33 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35333-33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026