PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35241-57
MS35241-57 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.300 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 1.188 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-3511, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35241-57
NSN: 5305-00-013-3511
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.300 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length1.188 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE
thread_quantity_per_inch32
NSN5305-00-013-3511
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35241-57 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 32
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD LENGTH: 1.188 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD CLASS: 2A A
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH32
INTERNAL DRIVE STYLESLOT
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH1.188 INCHES MAXIMUM IN
FASTENER LENGTH1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNK
THREAD CLASS2A A
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
NOMINAL THREAD DIAMETER0.164 INCHES IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
25091Interchangeable
interchangeable cross-reference
interchangeable
25091-01Interchangeable
interchangeable cross-reference
interchangeable
25091-C1Interchangeable
interchangeable cross-reference
interchangeable
133511Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35241-57?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35241-57?
MS35241-57 is a SCREW,MACHINE.
What parts can replace MS35241-57?
There are 4 known substitutes for MS35241-57: 25091, 25091-01, 25091-C1 and 1 more. Substitute compatibility should be verified for your specific system.
Is MS35241-57 still available?
MS35241-57 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35241-57

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026