PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 133511
133511 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The LEVER,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include special_features: ONE END TAPERED WITH HAND GRIP ATTACHED,SECOND END THD,PART OF DASH PANEL MODULE ASSEMBLY, end_item_identification: TRUCK FORKLIFT,DREXEL INDUSTRIES,MODEL NO. SL-44/3-ESS(E).

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-3511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
133511
NSN: 5305-00-013-3511
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
special_featuresONE END TAPERED WITH HAND GRIP ATTACHED,SECOND END THD,PART OF DASH PANEL MODULE ASSEMBLY
end_item_identificationTRUCK FORKLIFT,DREXEL INDUSTRIES,MODEL NO. SL-44/3-ESS(E)
NSN5305-00-013-3511
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 133511 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 32
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD LENGTH: 1.188 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD CLASS: 2A A
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH32
INTERNAL DRIVE STYLESLOT
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH1.188 INCHES MAXIMUM IN
FASTENER LENGTH1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNK
THREAD CLASS2A A
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
NOMINAL THREAD DIAMETER0.164 INCHES IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
25091Interchangeable
interchangeable cross-reference
interchangeable
25091-01Interchangeable
interchangeable cross-reference
interchangeable
25091-C1Interchangeable
interchangeable cross-reference
interchangeable
MS35241-57Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 133511?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 133511?
133511 is a LEVER,MANUAL CONTROL.
What parts can replace 133511?
There are 4 known substitutes for 133511: 25091, 25091-01, 25091-C1 and 1 more. Substitute compatibility should be verified for your specific system.
Is 133511 still available?
133511 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 133511

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026