PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35238-68
MS35238-68 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.065 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.167 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, fastener_length: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-3615, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35238-68
NSN: 5305-00-013-3615
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.065 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.167 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
fastener_length0.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
NSN5305-00-013-3615
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35238-68 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNF
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD DIAMETER0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.250 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNF
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES
NOMINAL THREAD DIAMETER0.190 INCHES IN
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
6007-2RZInterchangeable
interchangeable cross-reference
interchangeable
111-03510-4000Interchangeable
interchangeable cross-reference
interchangeable
72DP225Interchangeable
interchangeable cross-reference
interchangeable
MS35238Interchangeable
interchangeable cross-reference
interchangeable
133615Interchangeable
interchangeable cross-reference
interchangeable
100866Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35238-68?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35238-68?
MS35238-68 is a SCREW,MACHINE.
What parts can replace MS35238-68?
There are 13 known substitutes for MS35238-68: 6007-2RZ, 111-03510-4000, 72DP225 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35238-68?
MS35238-68 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-3615. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35238-68

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026