PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35238
MS35238 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.068 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.169 INCHES MINIMUM IN, screw_material: STEEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-272-5343, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35238
NSN: 5305-00-272-5343
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.068 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.169 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-272-5343
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35238 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
SCREW MATERIAL: STEEL
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
•
THREAD SERIES DESIGNATOR: UNF
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
THREAD SERIES DESIGNATORUNF
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
FASTENER LENGTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
133615Interchangeable
interchangeable cross-reference
interchangeable
MS35244-68Interchangeable
interchangeable cross-reference
interchangeable
E44Interchangeable
interchangeable cross-reference
interchangeable
6007-2RZInterchangeable
interchangeable cross-reference
interchangeable
111-03510-4000Interchangeable
interchangeable cross-reference
interchangeable
72DP225Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35238?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35238?
MS35238 is a SCREW,MACHINE.
What parts can replace MS35238?
There are 14 known substitutes for MS35238: 133615, MS35244-68, E44 and 11 more. Substitute compatibility should be verified for your specific system.
Is MS35238 still available?
MS35238 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35238

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026