PartsTable
Technical Data Sheet
PartsTable / O-RING / MS29512-4CP
MS29512-4CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.495 INCHES NOMINAL IN, center_hole_diameter: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-5994, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS29512-4CP
NSN: 5331-00-166-5994
FSC: 5331 — O-RING
CAGE: 05CK7 — WINTEC LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
hardness_rating65.0 SHORE DUROMETER A NOMINAL
outside_diameter0.495 INCHES NOMINAL IN
center_hole_diameter0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
elongation_percentage200 MAXIMUM
cross-sectional_height0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
NSN5331-00-166-5994
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS29512-4CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
ELONGATION PERCENTAGE200 MAXIMUM
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
HARDNESS RATING65.0 SHORE DUROMETER A NOMINAL
CRITICALITY CODE JUSTIFICATIONZZZW
OUTSIDE DIAMETER0.495 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
MS29512-04Interchangeable
interchangeable cross-reference
interchangeable
269-78REVAPC27Interchangeable
interchangeable cross-reference
interchangeable
GA1070Interchangeable
interchangeable cross-reference
interchangeable
5331PL2083851Interchangeable
Same NIIN cross-reference
interchangeable
MS29512-4Interchangeable
Same NIIN cross-reference
interchangeable
SAE-AS29512Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS29512-4CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS29512-4CP?
MS29512-4CP is a O-RING.
What parts can replace MS29512-4CP?
There are 8 known substitutes for MS29512-4CP: MS29512-04, 269-78REVAPC27, GA1070 and 5 more. Substitute compatibility should be verified for your specific system.
Is MS29512-4CP still available?
MS29512-4CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS29512-4CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026