PartsTable
Technical Data Sheet
PartsTable / O-RING / SAE-AS29512
SAE-AS29512 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 0.239 INCHES NOMINAL IN, cross-sectional_height: 0.064 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-135-8622, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS29512
NSN: 5331-00-135-8622
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter0.239 INCHES NOMINAL IN
cross-sectional_height0.064 INCHES NOMINAL IN
NSN5331-00-135-8622
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AS29512 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
AA3165-001G-16081Interchangeable
interchangeable cross-reference
interchangeable
P-819Interchangeable
interchangeable cross-reference
interchangeable
700A182Interchangeable
interchangeable cross-reference
interchangeable
457-6002Interchangeable
interchangeable cross-reference
interchangeable
MIS-13674/10Interchangeable
interchangeable cross-reference
interchangeable
SP3737Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SAE-AS29512?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS29512?
SAE-AS29512 is a O-RING.
What parts can replace SAE-AS29512?
There are 26 known substitutes for SAE-AS29512: AA3165-001G-16081, P-819, 700A182 and 23 more. Substitute compatibility should be verified for your specific system.
Is SAE-AS29512 still available?
SAE-AS29512 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS29512

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026