PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS28776M2-13CP
MS28776M2-13CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include ring_style: CONCENTRIC, joint_style: DIAGONAL JOINT, outside_diameter: 1.125 INCHES NOMINAL IN, surface_treatment: UNABLE TO DECODE, material_thickness: 0.125 INCHES NOMINAL IN, outer_edge_thickness: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-065-4628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28776M2-13CP
NSN: 5330-01-065-4628
FSC: 5330
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
ring_styleCONCENTRIC
joint_styleDIAGONAL JOINT
outside_diameter1.125 INCHES NOMINAL IN
surface_treatmentUNABLE TO DECODE
material_thickness0.125 INCHES NOMINAL IN
outer_edge_thickness0.094 INCHES NOMINAL IN
cross-sectional_shape_styleCOUNTERBORED STRAIGHT FACE
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
NSN5330-01-065-4628
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28776M2-13CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
•
JOINT STYLE: DIAGONAL JOINT
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTER EDGE THICKNESS: 0.094 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
SURFACE TREATMENT: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
RING STYLECONCENTRIC
JOINT STYLEDIAGONAL JOINT
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
OUTER EDGE THICKNESS0.094 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZW
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SURFACE TREATMENTUNABLE TO DECODE
CROSS-SECTIONAL SHAPE STYLECOUNTERBORED STRAIGHT FACE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
MS28776M2Interchangeable
interchangeable cross-reference
interchangeable
MS28776M2-14Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-5049Interchangeable
interchangeable cross-reference
interchangeable
5330PL1723562Interchangeable
interchangeable cross-reference
interchangeable
5330PL0660682Interchangeable
interchangeable cross-reference
interchangeable
ISR-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28776M2-13CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28776M2-13CP?
MS28776M2-13CP is a RING,WIPER.
What parts can replace MS28776M2-13CP?
There are 12 known substitutes for MS28776M2-13CP: MS28776M2, MS28776M2-14, MIL-R-5049 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28776M2-13CP?
MS28776M2-13CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-065-4628. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28776M2-13CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026