PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS28776M2-14
MS28776M2-14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include ring_style: CONCENTRIC, joint_style: DIAGONAL JOINT, inside_diameter: 1.313 INCHES NOMINAL IN, outside_diameter: 1.594 INCHES NOMINAL IN, surface_treatment: UNABLE TO DECODE, material_thickness: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-167-5392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28776M2-14
NSN: 5330-00-167-5392
FSC: 5330
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
ring_styleCONCENTRIC
joint_styleDIAGONAL JOINT
inside_diameter1.313 INCHES NOMINAL IN
outside_diameter1.594 INCHES NOMINAL IN
surface_treatmentUNABLE TO DECODE
material_thickness0.125 INCHES NOMINAL IN
fsc_application_dataBRAKE,MULTIPLE DISK
outer_edge_thickness0.094 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED, STRAIGHT FACE
NSN5330-00-167-5392
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28776M2-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED, STRAIGHT FACE
•
JOINT STYLE: DIAGONAL JOINT
•
FSC APPLICATION DATA: BRAKE,MULTIPLE DISK
•
SURFACE TREATMENT: UNABLE TO DECODE
•
OUTER EDGE THICKNESS: 0.094 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
•
INSIDE DIAMETER: 1.313 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED, STRAIGHT FACE
JOINT STYLEDIAGONAL JOINT
FSC APPLICATION DATABRAKE,MULTIPLE DISK
SURFACE TREATMENTUNABLE TO DECODE
OUTER EDGE THICKNESS0.094 INCHES NOMINAL IN
RING STYLECONCENTRIC
INSIDE DIAMETER1.313 INCHES NOMINAL IN
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER1.594 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
MS28776M2-CPInterchangeable
interchangeable cross-reference
interchangeable
MS28776M2-11Interchangeable
interchangeable cross-reference
interchangeable
MS28776M2-13Interchangeable
interchangeable cross-reference
interchangeable
MS28776M2Interchangeable
Same NIIN cross-reference
interchangeable
MIL-R-5049Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28776M2-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28776M2-14?
MS28776M2-14 is a RING,WIPER.
What parts can replace MS28776M2-14?
There are 5 known substitutes for MS28776M2-14: MS28776M2-CP, MS28776M2-11, MS28776M2-13 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28776M2-14?
MS28776M2-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-167-5392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28776M2-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026