PartsTable
Technical Data Sheet
PartsTable / O-RING / MS28775-234
MS28775-234 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, center_hole_diameter: 2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, criticality_code_justification: ADYT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-576-9733, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28775-234
NSN: 5331-00-576-9733
FSC: 5331 — O-RING
CAGE: A9271 — GORIZIANE GROUP SPA (ITA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
center_hole_diameter2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
criticality_code_justificationADYT
NSN5331-00-576-9733
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28775-234 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.230 INCHES MINIMUM AND 3.294 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.230 INCHES MINIMUM AND 3.294 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
KA500PC65Interchangeable
interchangeable cross-reference
interchangeable
SG3245PC29Interchangeable
interchangeable cross-reference
interchangeable
N304-7-12Interchangeable
interchangeable cross-reference
interchangeable
P1052-13Interchangeable
interchangeable cross-reference
interchangeable
DS-930572Interchangeable
interchangeable cross-reference
interchangeable
23111-99-0325Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28775-234?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28775-234?
MS28775-234 is a O-RING.
What parts can replace MS28775-234?
There are 24 known substitutes for MS28775-234: KA500PC65, SG3245PC29, N304-7-12 and 21 more. Substitute compatibility should be verified for your specific system.
Is MS28775-234 still available?
MS28775-234 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28775-234

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026