PartsTable
Technical Data Sheet
PartsTable / O-RING / 23111-99-0325
23111-99-0325 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-412-1158, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23111-99-0325
NSN: 5331-00-412-1158
FSC: 5331 — O-RING
CAGE: D9448 — RHEINMETALL LANDSYSTEME GMBH (DEU)
SPECIFICATIONS
materialRUBBER
center_hole_diameter2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-412-1158
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23111-99-0325 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN
MATERIALRUBBER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
807002-95Interchangeable
interchangeable cross-reference
interchangeable
75,79X3,53-24B7Interchangeable
interchangeable cross-reference
interchangeable
40-4V300Interchangeable
interchangeable cross-reference
interchangeable
1215-04Interchangeable
interchangeable cross-reference
interchangeable
1777-01Interchangeable
interchangeable cross-reference
interchangeable
98-0852Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23111-99-0325?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23111-99-0325?
23111-99-0325 is a O-RING.
What parts can replace 23111-99-0325?
There are 12 known substitutes for 23111-99-0325: 807002-95, 75,79X3,53-24B7, 40-4V300 and 9 more. Substitute compatibility should be verified for your specific system.
Is 23111-99-0325 still available?
23111-99-0325 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23111-99-0325

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026