PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS28136-5
MS28136-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, length: 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_height: 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-101-9644, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28136-5
NSN: 5340-01-101-9644
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
length0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_height0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
loop/holding_dimension0.400 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.250 INCHES MINIMUM IN
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE AND ASTM A684 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-101-9644
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28136-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE AND ASTM A684 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DISTANCE FROM LOOP CENTER TO END: 0.250 INCHES MINIMUM IN
•
WIDTH: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODUNTHREADED HOLE(S)
OVERALL HEIGHT0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE AND ASTM A684 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DISTANCE FROM LOOP CENTER TO END0.250 INCHES MINIMUM IN
WIDTH0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.400 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
LENGTH0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
M24066-3-003Interchangeable
interchangeable cross-reference
interchangeable
M24066/3-003Interchangeable
interchangeable cross-reference
interchangeable
946455-503Interchangeable
interchangeable cross-reference
interchangeable
MILC24066Interchangeable
interchangeable cross-reference
interchangeable
5340PL1524734Interchangeable
interchangeable cross-reference
interchangeable
NASM24066/3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28136-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28136-5?
MS28136-5 is a CLIP,SPRING TENSION.
What parts can replace MS28136-5?
There are 18 known substitutes for MS28136-5: M24066-3-003, M24066/3-003, 946455-503 and 15 more. Substitute compatibility should be verified for your specific system.
Is MS28136-5 still available?
MS28136-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28136-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026