Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 0.340 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.380 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-069-2803, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
946455-503
NSN:5340-00-069-2803 FSC:5340 CAGE:13973 — LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION (USA)
SPECIFICATIONS
width
0.750 INCHES NOMINAL IN
length
0.340 INCHES NOMINAL IN
material
STEEL OVERALL
hole_diameter
0.093 INCHES NOMINAL IN
overall_height
0.380 INCHES NOMINAL IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.016 INCHES NOMINAL IN
loop/holding_dimension
0.312 INCHES NOMINAL IN
distance_from_loop_center_to_end
0.191 INCHES MINIMUM IN
material_document_and_classification
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN
5340-00-069-2803
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
WIDTH: 0.750 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.312 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.191 INCHES MINIMUM IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
LENGTH: 0.340 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS
0.016 INCHES NOMINAL IN
WIDTH
0.750 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION
0.312 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END
0.191 INCHES MINIMUM IN
MOUNTING METHOD
UNTHREADED HOLE(S)
LENGTH
0.340 INCHES NOMINAL IN
MATERIAL
STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 946455-503?
946455-503 is a CLIP,SPRING TENSION.
What parts can replace 946455-503?
There are 21 known substitutes for 946455-503: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 18 more. Substitute compatibility should be verified for your specific system.
Is 946455-503 still available?
946455-503 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.