PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS27641+12A
MS27641+12A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The MS27641+12A is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-027-7423, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27641+12A
NSN: 3110-00-027-7423
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMS27641+12A
NSN3110-00-027-7423
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS27641+12A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.3750 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
INNER RING WIDTH: 0.4370 INCHES NOMINAL IN
•
SEAL QUANTITY: 2
•
BEARING SEAL TYPE: CONTACT
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES80 PCT. FULL OF MIL-G-81322,INTERNAL RADIAL CLEARANCE 0.0004- 0.0010 IN.,HEAT TREAT RINGS AND BALLS TO ROCKWELL C 60 TO 66 AND STABILIZED FOR OPERATION AT 250 DEG. F,RADIAL AND LATERAL ECCENTRICITY INNER RING 0.0010 IN. OUTER RING 0.0016 IN. IN
OUTER RING WIDTH0.3750 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
INNER RING WIDTH0.4370 INCHES NOMINAL IN
SEAL QUANTITY2
BEARING SEAL TYPECONTACT
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 BALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
AS27641Interchangeable
interchangeable cross-reference
interchangeable
MKP20AInterchangeable
interchangeable cross-reference
interchangeable
MS27641-10Interchangeable
interchangeable cross-reference
interchangeable
KP16AInterchangeable
interchangeable cross-reference
interchangeable
137-042-9108Interchangeable
interchangeable cross-reference
interchangeable
AN201KP16AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS27641+12A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27641+12A?
MS27641+12A is a MS27641+12A.
What parts can replace MS27641+12A?
There are 28 known substitutes for MS27641+12A: AS27641, MKP20A, MS27641-10 and 25 more. Substitute compatibility should be verified for your specific system.
Is MS27641+12A still available?
MS27641+12A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27641+12A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026