PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN201KP16A
AN201KP16A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE SEAL, bore_diameter: 1.0000 INCHES NOMINAL IN, load_direction: RADIAL, inner_ring_width: 0.5000 INCHES NOMINAL IN, outer_ring_width: 0.4380 INCHES NOMINAL IN, style_designator: SINGLE ROW INNER RING EXTENDED BOTH SIDES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-027-8142, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN201KP16A
NSN: 3110-00-027-8142
FSC: 3110
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE SEAL
bore_diameter1.0000 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
inner_ring_width0.5000 INCHES NOMINAL IN
outer_ring_width0.4380 INCHES NOMINAL IN
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
surface_treatmentCADMIUM EXPOSED SURFACES AS MOUNTED
overall_outside_diameter2.0000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE INNER RING
NSN3110-00-027-8142
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AN201KP16A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.0000 INCHES NOMINAL IN
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
•
INNER RING WIDTH: 0.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
•
LOAD DIRECTION: RADIAL
•
OUTER RING WIDTH: 0.4380 INCHES NOMINAL IN
•
SEAL QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER2.0000 INCHES NOMINAL IN
BEARING SEAL TYPECONTACT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
INNER RING WIDTH0.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
LOAD DIRECTIONRADIAL
OUTER RING WIDTH0.4380 INCHES NOMINAL IN
SEAL QUANTITY2
SPECIAL FEATURES80 PCT. FULL OF MIL-G-81322,INTERNAL RADIAL CLEARANCE 0.0004- 0.0010 IN.,HEAT TREAT RINGS AND BALLS TO ROCKWELL C 60 TO 66 AND STABILIZED FOR OPERATION AT 250 DEG. F,RADIAL AND LATERAL ECCENTRICITY INNER RING 0.0010 IN. OUTER RING 0.0016 IN. IN
MATERIALSTEEL COMP E52100 OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
AS27641Interchangeable
interchangeable cross-reference
interchangeable
MKP20AInterchangeable
interchangeable cross-reference
interchangeable
MS27641-10Interchangeable
interchangeable cross-reference
interchangeable
561-6404325-31Interchangeable
interchangeable cross-reference
interchangeable
MS27641-12Interchangeable
interchangeable cross-reference
interchangeable
AS7949Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN201KP16A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN201KP16A?
AN201KP16A is a BEARING,BALL,AIRFRAME.
What parts can replace AN201KP16A?
There are 25 known substitutes for AN201KP16A: AS27641, MKP20A, MS27641-10 and 22 more. Substitute compatibility should be verified for your specific system.
Is AN201KP16A still available?
AN201KP16A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN201KP16A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026