PartsTable
Technical Data Sheet
Download PDF

MS27114-22B — COUPLING,CLAMP,GROOVED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS27114-22B: COUPLING,CLAMP,GROOVED.

The COUPLING,CLAMP,GROOVED is a the manufacturer industrial component. Key specifications include shape: ROUND, height: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, material: IRON ALLOY 660 BOLT, nut_type: SELF-LOCKING HEXAGON, band_width: 1.200 INCHES MAXIMUM IN, root_width: 0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-225-2875, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27114-22B
NSN: 5340-00-225-2875
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
shapeROUND
height0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
materialIRON ALLOY 660 BOLT
nut_typeSELF-LOCKING HEXAGON
band_width1.200 INCHES MAXIMUM IN
root_width0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN
latch_styleSINGLE
load_rating16950.0 POUNDS MAXIMUM LBS
temp_rating-65.0 FAHRENHEIT AND 800.0 FAHRENHEIT DEGF
band_thickness0.062 INCHES NOMINAL IN
retainer_width0.875 INCHES NOMINAL IN
inside_diameter6.820 INCHES MINIMUM AND 6.910 INCHES MAXIMUM IN
NSN5340-00-225-2875
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS27114-22B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INCLUDED ANGLE IN DEG: 40.0
•
TEMP RATING: -65.0 FAHRENHEIT AND 800.0 FAHRENHEIT DEGF
•
LOAD RATING: 16950.0 POUNDS MAXIMUM LBS
•
BAND WIDTH: 1.200 INCHES MAXIMUM IN
•
ROOT WIDTH: 0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN
•
RETAINER WIDTH: 0.875 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5731, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE BOLT
•
SHAPE: ROUND
TECHNICAL CHARACTERISTICS
INCLUDED ANGLE IN DEG40.0
TEMP RATING-65.0 FAHRENHEIT AND 800.0 FAHRENHEIT DEGF
LOAD RATING16950.0 POUNDS MAXIMUM LBS
BAND WIDTH1.200 INCHES MAXIMUM IN
ROOT WIDTH0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN
RETAINER WIDTH0.875 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5732, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5731, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE BOLT
SHAPEROUND
CROSS-SECTIONAL SHAPE STYLEGROOVED RETAINER
BAND THICKNESS0.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
SAE-AS5355/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS5355/1-22BReference document
Same NSN cross-reference
Reference document — Design control — primary reference
M27536/1-22BReference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-27536/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
57464-688BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
35H14-3-688-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS27114-22B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27114-22B?
MS27114-22B is a COUPLING,CLAMP,GROOVED.
What parts can replace MS27114-22B?
There are 7 known substitutes for MS27114-22B: SAE-AS5355/1, AS5355/1-22B, M27536/1-22B and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS27114-22B?
MS27114-22B is cataloged in the U.S. Government catalog under NSN 5340-00-225-2875. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27114-22B

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.