PartsTable
Technical Data Sheet

SAE-AS5355/1 — COUPLING,CLAMP,GROOVED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SAE-AS5355/1: COUPLING,CLAMP,GROOVED.

The COUPLING,CLAMP,GROOVED is a the manufacturer industrial component. Key specifications include shape: ROUND, height: 0.281 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, root_width: 0.207 INCHES NOMINAL IN, latch_style: SINGLE, load_rating: 14500.0 POUNDS MAXIMUM LBS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-159-4562, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS5355/1
NSN: 5340-00-159-4562
NIINs: 001594562, 002252875, 006038487, 008284775, 008284783, 008992865, 009856582, 009856584, 011885210, 011885211, 011904258, 011906161, 011910699, 011930345, 011930346, 011948555, 011950161, 011976727, 012135598, 012580342, 013970894, 013970895, 016841596
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
shapeROUND
height0.281 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
root_width0.207 INCHES NOMINAL IN
latch_styleSINGLE
load_rating14500.0 POUNDS MAXIMUM LBS
temp_rating-65.0 FAHRENHEIT AND -800.0 FAHRENHEIT DEGF
segment_quantity1
surface_treatmentPASSIVATE OVERALL
sealing_inner_linerNOT INCLUDED
drilled_lockwire_holeNOT INCLUDED
included_angle_in_deg42.0
NSN5340-00-159-4562
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AS5355/1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INCLUDED ANGLE IN DEG: 40.0
•
TEMP RATING: -65.0 FAHRENHEIT AND 800.0 FAHRENHEIT DEGF
•
LOAD RATING: 15300.0 POUNDS MAXIMUM LBS
•
BAND WIDTH: 0.880 INCHES NOMINAL IN
•
ROOT WIDTH: 0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN
•
RETAINER WIDTH: 0.980 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE BOLT
TECHNICAL CHARACTERISTICS
INCLUDED ANGLE IN DEG40.0
TEMP RATING-65.0 FAHRENHEIT AND 800.0 FAHRENHEIT DEGF
LOAD RATING15300.0 POUNDS MAXIMUM LBS
BAND WIDTH0.880 INCHES NOMINAL IN
ROOT WIDTH0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN
RETAINER WIDTH0.980 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5732, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE BOLT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5525, COMP 660 ASSN STD SINGLE MATERIAL RESPONSE TRUNNION
SHAPEROUND
CROSS-SECTIONAL SHAPE STYLEGROOVED RETAINER
SUBSTITUTES & CROSS-REFERENCES 6
AS5355/1-18RReference document
Same NSN cross-reference
Reference document — Secondary reference
5H14-3-488-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
57464-488RReference document
Same NSN cross-reference
Reference document — Secondary reference
AS5355/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE AS5355Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS27114-18RReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SAE-AS5355/1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS5355/1?
SAE-AS5355/1 is a COUPLING,CLAMP,GROOVED.
What parts can replace SAE-AS5355/1?
There are 6 known substitutes for SAE-AS5355/1: AS5355/1-18R, 5H14-3-488-1, 57464-488R and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS5355/1?
SAE-AS5355/1 is cataloged in the U.S. Government catalog under NSN 5340-00-159-4562. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS5355/1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.