PartsTable
Technical Data Sheet
Download PDF

MS27114-07R — COUPLING,CLAMP,GROOVED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS27114-07R: COUPLING,CLAMP,GROOVED.

The COUPLING,CLAMP,GROOVED is a the manufacturer industrial component. Key specifications include shape: ROUND, height: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, nut_type: SELF-LOCKING HEXAGON, root_width: 0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN, latch_style: DOUBLE, load_rating: 8995.0 POUNDS MAXIMUM LBS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-828-4775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27114-07R
NSN: 5340-00-828-4775
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
shapeROUND
height0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
nut_typeSELF-LOCKING HEXAGON
root_width0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN
latch_styleDOUBLE
load_rating8995.0 POUNDS MAXIMUM LBS
temp_rating-65.0 FAHRENHEIT AND 800.0 FAHRENHEIT DEGF
band_thickness0.040 INCHES NOMINAL IN
retainer_width0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
inside_diameter2.560 INCHES MINIMUM AND 2.650 INCHES MAXIMUM IN
segment_quantity3
retainer_thickness0.063 INCHES NOMINAL IN
NSN5340-00-828-4775
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS27114-07R MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INCLUDED ANGLE IN DEG: 40.0
•
TEMP RATING: -65.0 FAHRENHEIT AND 800.0 FAHRENHEIT DEGF
•
LOAD RATING: 8995.0 POUNDS MAXIMUM LBS
•
ROOT WIDTH: 0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN
•
RETAINER WIDTH: 0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
•
SHAPE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: GROOVED RETAINER
•
BAND THICKNESS: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
INCLUDED ANGLE IN DEG40.0
TEMP RATING-65.0 FAHRENHEIT AND 800.0 FAHRENHEIT DEGF
LOAD RATING8995.0 POUNDS MAXIMUM LBS
ROOT WIDTH0.197 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN
RETAINER WIDTH0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
SHAPEROUND
CROSS-SECTIONAL SHAPE STYLEGROOVED RETAINER
BAND THICKNESS0.040 INCHES NOMINAL IN
SEALING INNER LINERNOT INCLUDED
RETAINER THICKNESS0.063 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
6132A4M-262ZSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
45H14-3-262-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS5355/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS5355/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS27114-07R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27114-07R?
MS27114-07R is a COUPLING,CLAMP,GROOVED.
What parts can replace MS27114-07R?
There are 4 known substitutes for MS27114-07R: 6132A4M-262Z, 45H14-3-262-1, SAE-AS5355/1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS27114-07R?
MS27114-07R is cataloged in the U.S. Government catalog under NSN 5340-00-828-4775. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27114-07R