MS25281-F10 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS25281-F10: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.065 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-891-3412, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS25281-F10

NSN: 5340-00-891-3412
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

diameter	0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
material	PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.065 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
loop_inside_diameter	0.625 INCHES NOMINAL IN
material_document_and_classification	ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end	1.383 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.758 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN
NSN	5340-00-891-3412

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

DIAMETER: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.065 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.383 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.758 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
OVERALL WIDTH	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.065 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.383 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.758 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN
MATERIAL	PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
LOOP INSIDE DIAMETER	0.625 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 6

10117493Reference document

Same NSN cross-reference

Reference document — Informative reference only

SAE-AS25281Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

5340PL1197953Reference document

Same NSN cross-reference

Reference document — Informative reference only

575-140021Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MS25281-10Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

5340PL1828602Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS25281-F10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS25281-F10?

MS25281-F10 is a CLAMP,LOOP.

What parts can replace MS25281-F10?

There are 6 known substitutes for MS25281-F10: 10117493, SAE-AS25281, 5340PL1197953 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS25281-F10?

MS25281-F10 is cataloged in the U.S. Government catalog under NSN 5340-00-891-3412. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS25281-F10 — CLAMP,LOOP

Request a Quote — MS25281-F10