PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS25281-16W
MS25281-16W ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: COLOR NATURAL, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-989-9224, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS25281-16W
NSN: 5340-00-989-9224
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_featuresCOLOR NATURAL
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.085 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
loop_inside_diameter0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.793 INCHES MINIMUM AND 0.863 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.553 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN
NSN5340-00-989-9224
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS25281-16W MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.085 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.553 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DIAMETER: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.085 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.553 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSINGLE LOOP
TONGUE HOLE TYPEROUND, UNTHREADED
END ITEM IDENTIFICATIONW/S: COUNTERMEASUR SET, AN/SLQ-32; TEST STATION, OQ-290(V)MSM; GUN, 5-IN./54 CAL, MK-42 & 45; AN/SPN-35B; SUPPORT EQUIPMENT, B-1 AIRCRAFT; RADAR SET, AN/TPN-18; AIRCRAFT, AC-135H, MC-130H, EC-130E, HC-130); RADAR, SERIES AN/SPS-49(V); TEST SET, ARM-155/156
DIAMETER0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
OVERALL WIDTH0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.793 INCHES MINIMUM AND 0.863 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
SAE-AS25281Upgraded Successor
successor cross-reference
successor
10117443Upgraded Successor
successor cross-reference
successor
9M843-2Upgraded Successor
successor cross-reference
successor
AS23190Upgraded Successor
successor cross-reference
successor
10117455Upgraded Successor
successor cross-reference
successor
MS25281R18Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS25281-16W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS25281-16W?
MS25281-16W is a CLAMP,LOOP.
What parts can replace MS25281-16W?
There are 26 known substitutes for MS25281-16W: SAE-AS25281, 10117443, 9M843-2 and 23 more. Substitute compatibility should be verified for your specific system.
Is MS25281-16W still available?
MS25281-16W is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS25281-16W

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026