PartsTable
Technical Data Sheet
Download PDF

MS25118-1 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS25118-1: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, head_style: HEADLESS (SETSCREW), point_style: FLAT, thread_class: 2A A, fastener_length: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, special_features: DRILLED HOLE ENTIRE LENGTH. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-085-7699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS25118-1
NSN: 5305-00-085-7699
FSC: 5305 — Screws
CAGE: 27361 — BURKE PRODUCTS INC (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
head_styleHEADLESS (SETSCREW)
point_styleFLAT
thread_class2A A
fastener_length0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
special_featuresDRILLED HOLE ENTIRE LENGTH
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.750 INCHES IN
thread_quantity_per_inch10
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-085-7699
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS25118-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.750 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
SPECIAL FEATURESDRILLED HOLE ENTIRE LENGTH
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
THREAD QUANTITY PER INCH10
MATERIALPLASTIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
MIL-A-7965Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS25118-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS25118-1?
MS25118-1 is a SETSCREW.
What parts can replace MS25118-1?
There is 1 known substitute for MS25118-1: MIL-A-7965. Substitute compatibility should be verified for your specific system.
What is the NSN for MS25118-1?
MS25118-1 is cataloged in the U.S. Government catalog under NSN 5305-00-085-7699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS25118-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.