PartsTable
Technical Data Sheet
Download PDF

MIL-A-7965 — SLEEVE,ANTENNA SUPPORT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

MIL-A-7965: SLEEVE,ANTENNA SUPPORT.

The SLEEVE,ANTENNA SUPPORT is a the manufacturer industrial component. Key specifications include overall_length: 10.190 INCHES NOMINAL IN, overall_diameter: 0.620 INCHES NOMINAL IN, special_features: COMPONENT TYPE AND QUANTITY:SWIVEL 1;MOUNTING CONFICATION:SWIVEL MOUNTED, component_type_and_quantity: 1 SLEEVE AND 1 SOCKET. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-085-7699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MIL-A-7965
NSN: 5305-00-085-7699
NIINs: 000857699, 002127420, 003429106, 005011642, 005047200, 005246786, 006314726, 006525810, 007546363, 009981563
FSC: 5305 — Screws
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
overall_length10.190 INCHES NOMINAL IN
overall_diameter0.620 INCHES NOMINAL IN
special_featuresCOMPONENT TYPE AND QUANTITY:SWIVEL 1;MOUNTING CONFICATION:SWIVEL MOUNTED
component_type_and_quantity1 SLEEVE AND 1 SOCKET
NSN5305-00-085-7699
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MIL-A-7965 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.750 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
SPECIAL FEATURESDRILLED HOLE ENTIRE LENGTH
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
THREAD QUANTITY PER INCH10
MATERIALPLASTIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
MS25118-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MIL-A-7965?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-A-7965?
MIL-A-7965 is a SLEEVE,ANTENNA SUPPORT. It is classified as a MRO (MRO_GENERAL).
What parts can replace MIL-A-7965?
There is 1 known substitute for MIL-A-7965: MS25118-1. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-A-7965?
MIL-A-7965 is cataloged in the U.S. Government catalog under NSN 5305-00-085-7699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-A-7965

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.