PartsTable
Technical Data Sheet
Download PDF

MS24693-6B — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS24693-6B: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include thread_direction: RIGHT-HAND, thread_series_designator: UNIFIED NATIONAL COARSE (UNC), part_name_assigned_by_controlling_agency: SCREW,MACHINE,FLAT COUNTERSUNK HEAD. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-340-4748, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24693-6B
NSN: 5305-00-340-4748
NIINs: 003404748, 015592423
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
thread_directionRIGHT-HAND
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
part_name_assigned_by_controlling_agencySCREW,MACHINE,FLAT COUNTERSUNK HEAD
NSN5305-00-340-4748
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24693-6B · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: OXIDE
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.370 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTOXIDE
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD LENGTH0.370 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 3C STYLE
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 4
MS24693C6BReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FFS92Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5305PL0717833Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS24693-6DReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS24693-6B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24693-6B?
MS24693-6B is a SCREW,MACHINE.
What parts can replace MS24693-6B?
There are 4 known substitutes for MS24693-6B: MS24693C6B, FFS92, 5305PL0717833 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24693-6B?
MS24693-6B is cataloged in the U.S. Government catalog under NSN 5305-00-340-4748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24693-6B