PartsTable
Technical Data Sheet
Download PDF

5305PL0717833 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5305PL0717833: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.370 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-340-4748, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305PL0717833
NSN: 5305-00-340-4748
FSC: 5305 — Screws
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.370 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentOXIDE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-340-4748
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305PL0717833 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: OXIDE
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.370 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTOXIDE
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD LENGTH0.370 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 3C STYLE
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 4
MS24693C6BReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS24693-6BReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FFS92Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS24693-6DReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5305PL0717833?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305PL0717833?
5305PL0717833 is a SCREW,MACHINE.
What parts can replace 5305PL0717833?
There are 4 known substitutes for 5305PL0717833: MS24693C6B, MS24693-6B, FFS92 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305PL0717833?
5305PL0717833 is cataloged in the U.S. Government catalog under NSN 5305-00-340-4748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305PL0717833