Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 8740 HOOK, design_type: SWIVEL, inside_width: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN, inside_length: 1.720 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN, overall_length: 3.560 INCHES NOMINAL IN, unattached_ring: NOT INCLUDED. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-197-5072, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS22042-2
NSN:5340-01-197-5072 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
material
STEEL COMP 4140 OR STEEL COMP 8740 HOOK
design_type
SWIVEL
inside_width
0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
inside_length
1.720 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
overall_length
3.560 INCHES NOMINAL IN
unattached_ring
NOT INCLUDED
surface_treatment
PHOSPHATE ZINC
end_connection_style
LOOP
hook_style_designator
PIVOT
rubber_covered_feature
NOT INCLUDED
material_document_and_classification
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE HOOK
surface_treatment_document_and_classification
DOD-P-16232,TY Z,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
NSN
5340-01-197-5072
COMPONENT DIAGRAM
KEY FEATURES
•
INSIDE WIDTH: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
RUBBER COVERED FEATURE: NOT INCLUDED
•
HOOK STYLE DESIGNATOR: PIVOT
•
UNATTACHED RING: NOT INCLUDED
•
MATERIAL: STEEL COMP 4140 OR STEEL COMP 8740 HOOK
•
SURFACE TREATMENT: PHOSPHATE ZINC
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: DOD-P-16232,TY Z,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE HOOK
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE WIDTH
0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
RUBBER COVERED FEATURE
NOT INCLUDED
HOOK STYLE DESIGNATOR
PIVOT
UNATTACHED RING
NOT INCLUDED
MATERIAL
STEEL COMP 4140 OR STEEL COMP 8740 HOOK
SURFACE TREATMENT
PHOSPHATE ZINC
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
DOD-P-16232,TY Z,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE HOOK
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS22042-2?
MS22042-2 is a SNAP HOOK.
What parts can replace MS22042-2?
There are 13 known substitutes for MS22042-2: MS22042-1, PIA-H-7195, IAC-A12428/1 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS22042-2?
MS22042-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-197-5072. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.