PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PIA-H-7195
PIA-H-7195 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FASTENER,PARACHUTE PACK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 8740 HOOK, design_type: SWIVEL, inside_width: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN, end_condition: THREADED, inside_length: 1.720 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN, opening_width: 0.688 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5573, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PIA-H-7195
NSN: 5340-00-205-5573
FSC: 5340
CAGE: 1HHQ4 — PARACHUTE INDUSTRY ASSOCIATION, INC. DBA PARACHUTE INDUSTRY ASSOCIATION INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 8740 HOOK
design_typeSWIVEL
inside_width0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
end_conditionTHREADED
inside_length1.720 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
opening_width0.688 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
overall_length3.560 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
special_featuresPROOF LOAD 20000 LBS,SCREW CAP MS90727-166,NUT MS35691-53,USED AS CLEVIS,SUSPENSION AIR DELIVERY TY 1 LBS
style_designatorANCHOR
material_diameter0.625 INCHES NOMINAL IN
surface_treatmentPHOSPHATE ZINC
NSN5340-00-205-5573
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PIA-H-7195 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOOK STYLE DESIGNATOR: PIVOT
•
DESIGN TYPE: SWIVEL
•
END CONNECTION STYLE: LOOP
•
MATERIAL: STEEL CONNECTION END
•
RUBBER COVERED FEATURE: NOT INCLUDED
•
UNATTACHED RING: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
HOOK STYLE DESIGNATORPIVOT
DESIGN TYPESWIVEL
OVERALL LENGTH3.562 INCHES NOMINAL IN
END CONNECTION STYLELOOP
MATERIALSTEEL CONNECTION END
MATERIALSTEEL HOOK
RUBBER COVERED FEATURENOT INCLUDED
UNATTACHED RINGNOT INCLUDED
INSIDE WIDTH0.375 INCHES NOMINAL IN
INSIDE LENGTH1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
MS22046-1Interchangeable
interchangeable cross-reference
interchangeable
PIA PS22046Interchangeable
interchangeable cross-reference
interchangeable
PIA-H-7195Interchangeable
interchangeable cross-reference
interchangeable
PS70087-1Interchangeable
interchangeable cross-reference
interchangeable
MS70087-1Interchangeable
interchangeable cross-reference
interchangeable
PS22047-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PIA-H-7195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PIA-H-7195?
PIA-H-7195 is a FASTENER,PARACHUTE PACK.
What parts can replace PIA-H-7195?
There are 15 known substitutes for PIA-H-7195: MS22046-1, PIA PS22046, PIA-H-7195 and 12 more. Substitute compatibility should be verified for your specific system.
Is PIA-H-7195 still available?
PIA-H-7195 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PIA-H-7195

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026