Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: CUSHION OZONE RESISTANT, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-143-6781, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS21919WDF46
NSN:5340-01-143-6781 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter
0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material
ALUMINUM ALLOY 2024 BAND
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features
CUSHION OZONE RESISTANT
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
CHROMATE BAND
material_thickness
0.062 INCHES NOMINAL IN
loop_inside_diameter
2.860 INCHES MINIMUM AND 2.890 INCHES MAXIMUM IN
cushioning_environmental_protection
FUEL RESISTANT
material_document_and_classification
QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end
2.155 INCHES NOMINAL IN
NSN
5340-01-143-6781
COMPONENT DIAGRAM
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
LOOP INSIDE DIAMETER: 2.860 INCHES MINIMUM AND 2.890 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.155 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES
CUSHION OZONE RESISTANT
OVERALL WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
TONGUE HOLE TYPE
ROUND, UNTHREADED
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
LOOP INSIDE DIAMETER
2.860 INCHES MINIMUM AND 2.890 INCHES MAXIMUM IN
STYLE DESIGNATOR
OFFSET MOUNT
DISTANCE FROM LOOP CENTER TO TONGUE END
2.155 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21919WDF46?
MS21919WDF46 is a CLAMP,LOOP.
What parts can replace MS21919WDF46?
There are 24 known substitutes for MS21919WDF46: AS21919WCG14, 10112740, AS21919 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21919WDF46?
MS21919WDF46 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-143-6781. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.