MS21919WCF08 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS21919WCF08: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, surface_treatment: PASSIVATE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-450-8035, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS21919WCF08

NSN: 5340-01-450-8035
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	RUBBER SYNTHETIC CUSHION
overall_width	0.375 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
surface_treatment	PASSIVATE BAND
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.500 INCHES NOMINAL IN
cushioning_environmental_protection	FUEL, AROMATIC AND WEATHER RESISTANT
distance_from_loop_center_to_tongue_end	0.842 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.654 INCHES NOMINAL IN
NSN	5340-01-450-8035

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: FUEL, AROMATIC AND WEATHER RESISTANT

•

STYLE DESIGNATOR: OFFSET MOUNT

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.842 INCHES NOMINAL IN

•

SURFACE TREATMENT: PASSIVATE BAND

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.654 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	FUEL, AROMATIC AND WEATHER RESISTANT
STYLE DESIGNATOR	OFFSET MOUNT
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.375 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.842 INCHES NOMINAL IN
SURFACE TREATMENT	PASSIVATE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.654 INCHES NOMINAL IN
MATERIAL	RUBBER SYNTHETIC CUSHION
MATERIAL	STEEL CORROSION RESISTING BAND

SUBSTITUTES & CROSS-REFERENCES 4

MIL-C-8603Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-DTL-8603Reference document

Same NSN cross-reference

Reference document — Identification reference

MS21104C8Reference document

Same NSN cross-reference

Reference document — Secondary reference

102611308Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS21919WCF08?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS21919WCF08?

MS21919WCF08 is a CLAMP,LOOP.

What parts can replace MS21919WCF08?

There are 4 known substitutes for MS21919WCF08: MIL-C-8603, MIL-DTL-8603, MS21104C8 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS21919WCF08?

MS21919WCF08 is cataloged in the U.S. Government catalog under NSN 5340-01-450-8035. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS21919WCF08 — CLAMP,LOOP

Request a Quote — MS21919WCF08