MS21104C8 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS21104C8: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, surface_treatment: PASSIVATE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-163-6016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS21104C8

NSN: 5340-01-163-6016
NIINs: 011636016, 014508035
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	STEEL CORROSION RESISTING BAND
overall_width	0.375 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
surface_treatment	PASSIVATE BAND
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.500 INCHES NOMINAL IN
cushioning_environmental_protection	FUEL, AROMATIC AND WEATHER RESISTANT
distance_from_loop_center_to_tongue_end	0.842 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.654 INCHES NOMINAL IN
NSN	5340-01-163-6016

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND

•

CUSHIONING ENVIRONMENTAL PROTECTION: FUEL RESISTANT

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTION	FUEL RESISTANT
STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.842 INCHES NOMINAL IN
SPECIAL FEATURES	CUSHION OZONE RESISTANT; CUSHION COLOR YELLOW

SUBSTITUTES & CROSS-REFERENCES 6

AS21919WCF8Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS21919WCF8Reference document

Same NSN cross-reference

Reference document — Secondary reference

TA025035WH008NBSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

830WSS8AFSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

JM44LC33WH8NLSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS21104C8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS21104C8?

MS21104C8 is a CLAMP,LOOP.

What parts can replace MS21104C8?

There are 6 known substitutes for MS21104C8: AS21919WCF8, SAE-AS21919, MS21919WCF8 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS21104C8?

MS21104C8 is cataloged in the U.S. Government catalog under NSN 5340-01-163-6016. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS21104C8 — CLAMP,LOOP

Request a Quote — MS21104C8