PartsTable
Technical Data Sheet
Download PDF

MS21332-3 — FASTENER,SNAPSLIDE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS21332-3: FASTENER,SNAPSLIDE.

The FASTENER,SNAPSLIDE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING POST, thickness: 0.050 INCHES NOMINAL IN, hole_depth: 0.125 INCHES NOMINAL IN, latch_style: FLAT TURNED-UP END, guide_length: 0.625 INCHES NOMINAL IN, inside_width: 0.468 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-290-4925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21332-3
NSN: 5325-00-290-4925
FSC: 5325 — Fastening Devices
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL CORROSION RESISTING POST
thickness0.050 INCHES NOMINAL IN
hole_depth0.125 INCHES NOMINAL IN
latch_styleFLAT TURNED-UP END
guide_length0.625 INCHES NOMINAL IN
inside_width0.468 INCHES NOMINAL IN
notch_diameter0.187 INCHES NOMINAL IN
overall_length0.300 INCHES NOMINAL IN
latch_guide_styleINDENTED END
post_shank_length0.163 INCHES NOMINAL IN
guide_hole_diameter0.129 INCHES NOMINAL IN
latch_overall_length1.125 INCHES NOMINAL IN
NSN5325-00-290-4925
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS21332-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POST SHOULDER LENGTH: 0.075 INCHES NOMINAL IN
•
INSIDE WIDTH: 0.468 INCHES NOMINAL IN
•
SNAPSLIDE POST STYLE: POST
•
GUIDE HOLE DIAMETER: 0.129 INCHES NOMINAL IN
•
HOLE DEPTH: 0.125 INCHES NOMINAL IN
•
NOTCH DIAMETER: 0.187 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.086 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
POST SHOULDER LENGTH0.075 INCHES NOMINAL IN
INSIDE WIDTH0.468 INCHES NOMINAL IN
SNAPSLIDE POST STYLEPOST
GUIDE HOLE DIAMETER0.129 INCHES NOMINAL IN
HOLE DEPTH0.125 INCHES NOMINAL IN
NOTCH DIAMETER0.187 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.086 INCHES NOMINAL IN
OVERALL LENGTH0.300 INCHES NOMINAL IN
SHANK OUTSIDE DIAMETER0.125 INCHES NOMINAL IN
LATCH GUIDE STYLEINDENTED END
SUBSTITUTES & CROSS-REFERENCES 2
2W2L2G1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
3195-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS21332-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21332-3?
MS21332-3 is a FASTENER,SNAPSLIDE.
What parts can replace MS21332-3?
There are 2 known substitutes for MS21332-3: 2W2L2G1, 3195-3. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21332-3?
MS21332-3 is cataloged in the U.S. Government catalog under NSN 5325-00-290-4925. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21332-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.