PartsTable
Technical Data Sheet
Download PDF

3195-3 — GAGE,DEPTH,BONE SCREW

✓ Government record, cited
Lindy · BOLT SCREW
PRODUCT OVERVIEW

3195-3: GAGE,DEPTH,BONE SCREW.

The GAGE,DEPTH,BONE SCREW is a Lindy industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, part_name_assigned_by_controlling_agency: GAGE DEPTH BONE SCREW CRS F/2.4MM CORTEX SCREW XLG F/397.21TROCR MM. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-290-4925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3195-3
NSN: 5325-00-290-4925
NIINs: 002904925, 008415210, 014293861
FSC: 5325 — Fastening Devices
CAGE: 81352 — AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
special_featuresDEPTH GAUGE FOR 2.4 MM CORTEX SCREWS, EXTRA LONG; FOR USE WITH TROCAR (397.21); FOR USE DURING MANDIBULAR/CRANIOFACIAL SURGERY MM
part_name_assigned_by_controlling_agencyGAGE DEPTH BONE SCREW CRS F/2.4MM CORTEX SCREW XLG F/397.21TROCR MM
NSN5325-00-290-4925
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3195-3 · Lindy ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POST SHOULDER LENGTH: 0.075 INCHES NOMINAL IN
•
INSIDE WIDTH: 0.468 INCHES NOMINAL IN
•
SNAPSLIDE POST STYLE: POST
•
GUIDE HOLE DIAMETER: 0.129 INCHES NOMINAL IN
•
HOLE DEPTH: 0.125 INCHES NOMINAL IN
•
NOTCH DIAMETER: 0.187 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.086 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
POST SHOULDER LENGTH0.075 INCHES NOMINAL IN
INSIDE WIDTH0.468 INCHES NOMINAL IN
SNAPSLIDE POST STYLEPOST
GUIDE HOLE DIAMETER0.129 INCHES NOMINAL IN
HOLE DEPTH0.125 INCHES NOMINAL IN
NOTCH DIAMETER0.187 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.086 INCHES NOMINAL IN
OVERALL LENGTH0.300 INCHES NOMINAL IN
SHANK OUTSIDE DIAMETER0.125 INCHES NOMINAL IN
LATCH GUIDE STYLEINDENTED END
SUBSTITUTES & CROSS-REFERENCES 2
2W2L2G1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS21332-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3195-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3195-3?
3195-3 is a GAGE,DEPTH,BONE SCREW manufactured by Lindy.
What parts can replace 3195-3?
There are 2 known substitutes for 3195-3: 2W2L2G1, MS21332-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 3195-3?
3195-3 is cataloged in the U.S. Government catalog under NSN 5325-00-290-4925. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3195-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.