PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS21314-10
MS21314-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, mounting_pad: NOT INCLUDED, overall_width: 0.750 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, overall_length: 2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN, style_designator: CURVED ARCH, surface_treatment: CADMIUM AND CHROMATE OR ZINC AND CHROMATE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-190-6804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21314-10
NSN: 5340-00-190-6804
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.750 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
overall_length2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN
style_designatorCURVED ARCH
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE
material_thickness0.065 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
mounting_hole_size0.265 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
inside_diameter/arch_length1.114 INCHES MINIMUM AND 1.134 INCHES MAXIMUM IN
nondefinitive_spec/std_data2 TYPE AND A STYLE
distance_between_mounting_hole_centers2.250 INCHES NOMINAL IN
NSN5340-00-190-6804
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21314-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: MS21314-10 PART
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-636 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE TREATMENT: ZINC
•
MOUNTING PAD: NOT INCLUDED
•
MOUNTING HOLE SIZE: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAMS21314-10 PART
STYLE DESIGNATORCURVED ARCH
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-636 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTZINC
MOUNTING PADNOT INCLUDED
OVERALL WIDTH0.750 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.281 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH1.125 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MS21314-1Interchangeable
interchangeable cross-reference
interchangeable
FF-S-760Interchangeable
interchangeable cross-reference
interchangeable
PTT10Interchangeable
interchangeable cross-reference
interchangeable
NASM21314Interchangeable
interchangeable cross-reference
interchangeable
PTT12Interchangeable
interchangeable cross-reference
interchangeable
MS21314-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS21314-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21314-10?
MS21314-10 is a STRAP,RETAINING.
What parts can replace MS21314-10?
There are 18 known substitutes for MS21314-10: MS21314-1, FF-S-760, PTT10 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21314-10?
MS21314-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-190-6804. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21314-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026