Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, mounting_pad: NOT INCLUDED, overall_width: 0.750 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, overall_length: 2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN, style_designator: CURVED ARCH, surface_treatment: CADMIUM AND CHROMATE OR ZINC AND CHROMATE. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-190-6798, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NASM21314
NSN:5340-00-190-6798 FSC:5340 CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
cushion
NOT INCLUDED
material
STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_pad
NOT INCLUDED
overall_width
0.750 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
overall_length
2.875 INCHES MINIMUM AND 3.125 INCHES MAXIMUM IN
style_designator
CURVED ARCH
surface_treatment
CADMIUM AND CHROMATE OR ZINC AND CHROMATE
material_thickness
0.065 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
mounting_hole_size
0.265 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
inside_diameter/arch_length
1.114 INCHES MINIMUM AND 1.134 INCHES MAXIMUM IN
nondefinitive_spec/std_data
2 TYPE AND A STYLE
material_document_and_classification
QQ-S-698 TEMPER HALF HARD FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN
5340-00-190-6798
COMPONENT DIAGRAM
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND A STYLE
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
CUSHION: NOT INCLUDED
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.312 INCHES NOMINAL IN
•
INSIDE DIAMETER/ARCH LENGTH: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH
1.750 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA
2 TYPE AND A STYLE
SURFACE TREATMENT
CADMIUM AND CHROMATE OR ZINC AND CHROMATE
MATERIAL
STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM21314?
NASM21314 is a STRAP,RETAINING.
What parts can replace NASM21314?
There are 21 known substitutes for NASM21314: FF-S-760, 167A33, NASM760-TYP1, STYB, 5/16 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM21314?
NASM21314 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-190-6798. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.