PartsTable
Technical Data Sheet
Download PDF

MS21252-6L — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS21252-6L: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.367 INCHES NOMINAL IN, fork_depth: 0.656 INCHES NOMINAL IN, shank_length: 1.422 INCHES MINIMUM AND 1.578 INCHES MAXIMUM IN, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-068-0548, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21252-6L
NSN: 5340-00-068-0548
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.367 INCHES NOMINAL IN
fork_depth0.656 INCHES NOMINAL IN
shank_length1.422 INCHES MINIMUM AND 1.578 INCHES MAXIMUM IN
thread_class3A ROD CONNECTION A
hole_diameter0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
overall_width0.542 INCHES MINIMUM AND 0.557 INCHES MAXIMUM IN
thread_length0.703 INCHES MINIMUM AND 0.797 INCHES MAXIMUM ROD CONNECTION IN
shank_diameter0.243 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
fork_span_width0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionLEFT-HAND ROD CONNECTION
NSN5340-00-068-0548
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21252-6L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.243 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.141 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.367 INCHES NOMINAL IN
•
THREAD LENGTH: 0.703 INCHES MINIMUM AND 0.797 INCHES MAXIMUM ROD CONNECTION IN
•
SHANK LENGTH: 1.422 INCHES MINIMUM AND 1.578 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.243 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
FORK SPAN WIDTH0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FORK ARM THICKNESS0.141 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.367 INCHES NOMINAL IN
THREAD LENGTH0.703 INCHES MINIMUM AND 0.797 INCHES MAXIMUM ROD CONNECTION IN
SHANK LENGTH1.422 INCHES MINIMUM AND 1.578 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.542 INCHES MINIMUM AND 0.557 INCHES MAXIMUM IN
THREAD DIRECTIONLEFT-HAND ROD CONNECTION
SUBSTITUTES & CROSS-REFERENCES 3
MS21252-6LLReference document
Same NSN cross-reference
Reference document — Secondary reference
941.93.26.113Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MIL-DTL-8878Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS21252-6L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21252-6L?
MS21252-6L is a CLEVIS,ROD END.
What parts can replace MS21252-6L?
There are 3 known substitutes for MS21252-6L: MS21252-6LL, 941.93.26.113, MIL-DTL-8878. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21252-6L?
MS21252-6L is cataloged in the U.S. Government catalog under NSN 5340-00-068-0548. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21252-6L

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.