PartsTable
Technical Data Sheet
Download PDF

MIL-DTL-8878 — TURNBUCKLE BODY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MIL-DTL-8878: TURNBUCKLE BODY.

The TURNBUCKLE BODY is a the manufacturer industrial component. Key specifications include angle: 90.0 DEGREES NOMINAL, material: STEEL ROD END, hole_shape: ROUND, special_features: END CLEVIS, surface_treatment: CADMIUM OVERALL, part_name_assigned_by_controlling_agency: ROD END. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-057-7184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-8878
NSN: 5340-00-057-7184
NIINs: 000577184, 000611812, 000679871, 000679873, 000679875, 000679876, 000679877, 000679878, 000679879, 000679880, 000679882, 000679885, 000679887, 000679888, 000680525, 000680526, 000680527, 000680528, 000680529, 000680530, 000680531, 000680532, 000680533, 000680534, 000680535, 000680536, 000680547, 000680548, 000680549, 000681820, 000681821, 000681822, 000682016, 000682018, 000688433, 000690593, 000690594, 000690595, 000690597, 000690598, 000690599, 000690600, 000690601, 000690602, 000690603, 000690604, 000690605, 000690606, 000690607, 000690608, 000690609, 000690610, 000690614, 000694925, 000694926, 000694927, 000694928, 000694929, 000694930, 000694931, 000694932, 000694933, 000694934, 000694935, 000694936, 000694937, 000694938, 000694960, 000694961, 000694962, 000694963, 000712532, 000712533, 000813637, 002254583, 002679694, 002679695, 002679696, 002679697, 004119859, 004355780, 004359371, 004359372, 004432532, 004436843, 005294274, 005654290, 009950597, 010771350, 010839732, 011436828, 012317120, 012551425, 013060331, 013694206, 014659031, 014821421, 015577092, 015866536, 016069597, 016178268, 016280827, 016978147
FSC: 5340 — Hardware, Commercial
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
angle90.0 DEGREES NOMINAL
materialSTEEL ROD END
hole_shapeROUND
special_featuresEND CLEVIS
surface_treatmentCADMIUM OVERALL
part_name_assigned_by_controlling_agencyROD END
NSN5340-00-057-7184
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-DTL-8878 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE THICKNESS: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
TONGUE WIDTH: 0.625 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
RADIUS: 0.312 INCHES NOMINAL IN
•
THREAD LENGTH: 0.578 INCHES MINIMUM AND 0.672 INCHES MAXIMUM ROD CONNECTION IN
•
STYLE DESIGNATOR: CONNECTOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
TECHNICAL CHARACTERISTICS
TONGUE THICKNESS0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
TONGUE WIDTH0.625 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
RADIUS0.312 INCHES NOMINAL IN
THREAD LENGTH0.578 INCHES MINIMUM AND 0.672 INCHES MAXIMUM ROD CONNECTION IN
STYLE DESIGNATORCONNECTOR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.250 INCHES ROD CONNECTION IN
SHANK OUTSIDE DIAMETER0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
MS21254-5RSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MIL-DTL-8878?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-8878?
MIL-DTL-8878 is a TURNBUCKLE BODY.
What parts can replace MIL-DTL-8878?
There is 1 known substitute for MIL-DTL-8878: MS21254-5RS. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-8878?
MIL-DTL-8878 is cataloged in the U.S. Government catalog under NSN 5340-00-057-7184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-8878