JM44LC33WH8NL — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC33WH8NL: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHION, overall_width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, special_features: CUSHION OZONE RESISTANT; CUSHION COLOR YELLOW, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-163-6016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC33WH8NL

NSN: 5340-01-163-6016
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHION
overall_width	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
special_features	CUSHION OZONE RESISTANT; CUSHION COLOR YELLOW
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	PASSIVATE BAND
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
cushioning_environmental_protection	FUEL RESISTANT
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.842 INCHES NOMINAL IN
NSN	5340-01-163-6016

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND

•

CUSHIONING ENVIRONMENTAL PROTECTION: FUEL RESISTANT

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTION	FUEL RESISTANT
STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3215 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.842 INCHES NOMINAL IN
SPECIAL FEATURES	CUSHION OZONE RESISTANT; CUSHION COLOR YELLOW

SUBSTITUTES & CROSS-REFERENCES 6

MS21104-C8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

AS21919WCF8Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS21919WCF8Reference document

Same NSN cross-reference

Reference document — Secondary reference

TA025035WH008NBSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

830WSS8AFSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy JM44LC33WH8NL?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC33WH8NL?

JM44LC33WH8NL is a CLAMP,LOOP.

What parts can replace JM44LC33WH8NL?

There are 6 known substitutes for JM44LC33WH8NL: MS21104-C8, AS21919WCF8, SAE-AS21919 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC33WH8NL?

JM44LC33WH8NL is cataloged in the U.S. Government catalog under NSN 5340-01-163-6016. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC33WH8NL — CLAMP,LOOP

Request a Quote — JM44LC33WH8NL