Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: CUSHION OZONE RESISTANT, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-169-3006, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS21104C12
NSN:5340-01-169-3006 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter
0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material
RUBBER CHLOROPRENE CLASS CR CUSHION
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features
CUSHION OZONE RESISTANT
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
PASSIVATE BAND
material_thickness
0.032 INCHES NOMINAL IN
loop_inside_diameter
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
cushioning_environmental_protection
WEATHER RESISTANT
material_document_and_classification
AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end
1.060 INCHES NOMINAL IN
NSN
5340-01-169-3006
COMPONENT DIAGRAM
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHION
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.060 INCHES NOMINAL IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21104C12?
MS21104C12 is a CLAMP,LOOP.
What parts can replace MS21104C12?
There are 25 known substitutes for MS21104C12: 10117317, AS21919WDG12, ST9M630D12 and 22 more. Substitute compatibility should be verified for your specific system.
Is MS21104C12 still available?
MS21104C12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.