PartsTable
Technical Data Sheet
Download PDF

MS20392-5-23 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS20392-5-23: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.062 INCHES NOMINAL IN, diameter: 0.375 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.078 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-199-3793, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS20392-5-23
NSN: 5315-00-199-3793
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
height0.062 INCHES NOMINAL IN
diameter0.375 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.078 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.500 INCHES NOMINAL IN
surface_treatmentCADMIUM OR ZINC OVERALL
under_head_length0.897 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
first_hole_diameter0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-199-3793
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS20392-5-23 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.078 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.897 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.500 INCHES NOMINAL IN
•
DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.078 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.897 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.500 INCHES NOMINAL IN
DIAMETER0.375 INCHES NOMINAL IN
HEAD STYLEFLAT
HEIGHT0.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
AN396-23Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM5673Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILP5673Reference document
Same NSN cross-reference
Reference document — Secondary reference
801339Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS20392-5-23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS20392-5-23?
MS20392-5-23 is a PIN,STRAIGHT,HEADED.
What parts can replace MS20392-5-23?
There are 4 known substitutes for MS20392-5-23: AN396-23, NASM5673, MILP5673 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS20392-5-23?
MS20392-5-23 is cataloged in the U.S. Government catalog under NSN 5315-00-199-3793. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS20392-5-23

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.