AN396-23 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

AN396-23: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.062 INCHES NOMINAL IN, diameter: 0.375 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.078 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-199-3793, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AN396-23

NSN: 5315-00-199-3793
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)

SPECIFICATIONS

height	0.062 INCHES NOMINAL IN
diameter	0.375 INCHES NOMINAL IN
material	STEEL OVERALL
head_style	FLAT
chamfer_length	0.078 INCHES NOMINAL IN
style_designator	STRAIGHT
pin_chamfer_angle	15.0 DEGREES NOMINAL
pin_head_diameter	0.500 INCHES NOMINAL IN
surface_treatment	CADMIUM OR ZINC OVERALL
under_head_length	0.897 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
first_hole_diameter	0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
hole_arrangement_style	ONE END DRILLED
NSN	5315-00-199-3793

COMPONENT DIAGRAM

KEY FEATURES

•

CHAMFER LENGTH: 0.078 INCHES NOMINAL IN

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

UNDER HEAD LENGTH: 0.897 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN

•

PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL

•

FIRST HOLE DIAMETER: 0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: STRAIGHT

•

PIN HEAD DIAMETER: 0.500 INCHES NOMINAL IN

•

DIAMETER: 0.375 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

CHAMFER LENGTH	0.078 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLE	ONE END DRILLED
UNDER HEAD LENGTH	0.897 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
PIN CHAMFER ANGLE	15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER	0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	0.500 INCHES NOMINAL IN
DIAMETER	0.375 INCHES NOMINAL IN
HEAD STYLE	FLAT
HEIGHT	0.062 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

MS20392-5-23Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

NASM5673Reference document

Same NSN cross-reference

Reference document — Secondary reference

MILP5673Reference document

Same NSN cross-reference

Reference document — Secondary reference

801339Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy AN396-23?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AN396-23?

AN396-23 is a PIN,STRAIGHT,HEADED.

What parts can replace AN396-23?

There are 4 known substitutes for AN396-23: MS20392-5-23, NASM5673, MILP5673 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AN396-23?

AN396-23 is cataloged in the U.S. Government catalog under NSN 5315-00-199-3793. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AN396-23 — PIN,STRAIGHT,HEADED

Request a Quote — AN396-23