MS18212-59 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

MS18212-59: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, thread_length: 0.136 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, screw_material: PLASTIC POLYHEXAMETHYLENE AMIDE.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-033-5217, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS18212-59

NSN: 5305-01-033-5217
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

head_style	PAN NO. 2
head_height	0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
thread_length	0.136 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
screw_material	PLASTIC POLYHEXAMETHYLENE AMIDE
fastener_length	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	SLOT
nominal_thread_diameter	0.190 INCHES IN
thread_quantity_per_inch	24
thread_series_designator	UNIFIED NATIONAL COARSE (UNC)
NSN	5305-01-033-5217

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 TY 1 MIL SPEC SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.136 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.190 INCHES IN

•

HEAD STYLE: PAN NO. 2

•

THREAD DIRECTION: RIGHT-HAND

•

NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
FASTENER LENGTH	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-20693 TY 1 MIL SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.136 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	PAN NO. 2
THREAD DIRECTION	RIGHT-HAND
NONDEFINITIVE SPEC/STD DATA	1 TYPE AND 9S STYLE
SCREW MATERIAL	PLASTIC POLYHEXAMETHYLENE AMIDE
INTERNAL DRIVE STYLE	SLOT

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 3

AA55624-83Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

FF-S-92Reference document

Same NSN cross-reference

Reference document — Identification reference

7903678-46Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MS18212-59?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS18212-59?

MS18212-59 is a SCREW,MACHINE.

What parts can replace MS18212-59?

There are 3 known substitutes for MS18212-59: AA55624-83, FF-S-92, 7903678-46. Substitute compatibility should be verified for your specific system.

What is the NSN for MS18212-59?

MS18212-59 is cataloged in the U.S. Government catalog under NSN 5305-01-033-5217. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS18212-59 — SCREW,MACHINE

Request a Quote — MS18212-59