PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17160-7
MS17160-7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, length: 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN, diameter: 0.188 INCHES NOMINAL IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-026-2135, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17160-7
NSN: 5340-00-026-2135
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
length0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
diameter0.188 INCHES NOMINAL IN
materialSTEEL COMP 1065 OVERALL
hole_diameter0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_height0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
overall_length3.220 INCHES MINIMUM AND 3.280 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
style_designatorSLOTTED
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.011 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN
loop/holding_dimension0.282 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
NSN5340-00-026-2135
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS17160-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
WIDTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.191 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODUNTHREADED HOLE(S)
WIDTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.191 INCHES MINIMUM IN
OVERALL HEIGHT0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
LENGTH0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
MILC24066-2Upgraded Successor
successor cross-reference
successor
M24066/2-011Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17160-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17160-7?
MS17160-7 is a CLIP,SPRING TENSION.
What parts can replace MS17160-7?
There are 23 known substitutes for MS17160-7: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 20 more. Substitute compatibility should be verified for your specific system.
Is MS17160-7 still available?
MS17160-7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17160-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026